Grinding a loblolly pine stump is not like grinding anything else
Grinding a loblolly pine stump in Woodstock: what makes this species different, what it costs, and what to tell the crew when you call.
Free quotes. No obligation. We connect Woodstock homeowners with a vetted local stump grinding crew. We are not a contractor and we do not perform the work ourselves.
Pinus taeda
Loblolly is the default pine across north Georgia and the reason so many lots here were clear-cut and replanted in the eighties and nineties. They grow fast, they grow straight, and they come down in storms because the root plate is shallow relative to the height.
Pine stumps are relatively easy grinding. The wood is soft and resinous, the root flare is modest compared to a hardwood of the same height, and the roots do not resprout. If the stump is accessible, a pine is usually the cheapest grind you will get quoted.
The complication is sap. Fresh pine gums up the teeth on a grinder, so a crew working a recently felled pine takes longer than the diameter suggests. If the tree came down in a storm last week rather than last year, mention it.
The other thing worth knowing: pines usually come out in groups. They were planted in groups. If one has gone, look at the ones beside it before you book, because the second stump in the same visit is about a quarter cheaper than the first.
What stump grinding costs in Woodstock
Crews around Cherokee County quote 3 to 5 dollars per inch of stump diameter, measured at ground level, with a minimum of 100 to 200 dollars to bring the machine out. These are local market ranges gathered in 2026, not a quote.
| Stump size | Typical around here | Range |
|---|---|---|
| Small, up to 12 inches ornamental pear, dogwood, young pine | 12 inches | $100 to $200 |
| Medium, 12 to 24 inches mature loblolly pine, river birch | 20 inches | $100 to $200 |
| Large, 24 to 36 inches water oak, sweetgum, old hardwood | 30 inches | $100 to $200 |
| Very large, over 36 inches heritage oak, old-growth poplar | 42 inches | $126 to $210 |
Every crew prices the job in front of them. Access, slope and grinding depth move the number more than diameter does, so treat this as the ballpark you should expect, then get a real quote.
Other trees we get asked about
Stump services
Common questions
How much does stump grinding cost in Woodstock?
Crews in the Atlanta metro quote three to five dollars per inch of stump diameter, with a minimum of one hundred to two hundred dollars to bring the machine out. A typical residential stump lands between one hundred fifty and three hundred dollars. Large or hard to reach stumps run three hundred to five hundred and up.
How do I measure my stump?
Measure straight across the widest point at ground level, including the flare, not the trunk higher up. People routinely underestimate by six or eight inches because they measure the wrong place, then get a quote that feels high.
How deep does the grinding go?
Four to six inches below grade is standard, which is enough to fill with topsoil and grow grass. If you are setting a fence post, pouring concrete or laying sod, ask for twelve inches or more and say what is going in that spot.
Will the crew fit into my back yard?
A standard walk-behind grinder needs roughly thirty six inches of clearance. Measure your gate before you call. If it is narrower, the crew brings a smaller machine or hand-clears a path, and that changes the price more than stump size does.
What happens to the wood chips?
Grinding produces more chips than the hole will hold. Leaving them on site is free and most people spread them as mulch. Hauling them away is an extra charge, so ask up front rather than at the end.
Free quotes. No obligation. We connect Woodstock homeowners with a vetted local stump grinding crew. We are not a contractor and we do not perform the work ourselves.